Hefei Hengcheng Industrial Equipment Technology Co., Ltd
BASED ON POWDER, EQUIPPED WITH THE WORLD
Add to Cart
45 t / h Capacity 1250 Mesh Calcite Powder Grinding Mill Equipment
Description
【Application Industry】
Widely used in mining, building materials, chemical, metallurgical industries, transportation, water conservancy projects, etc.
Calcite vertical mill is suitable for grinding of all kinds of materials whose Moh's hardness is below 9.3, such as calcium carbonate, barite, dolomite, calcite, limestone, kaolin, bentonite, marble, gypsum, quartz, feldspar, clay, talc, fluorite, clay, white mud, mica, refractory material, glass, total about 1000 kinds of materials.
【Working Principle】
The motor drives the grinding disc to rotate through the reducer, the material falls into the center of the grinding disc from the feed inlet, and the hot air enters the mill from the air inlet. Under the action of centrifugal force, the material moves to the edge of the grinding disc, and is crushed by the grinding roller when passing through the annular groove on the grinding disc. The crushed material is carried by the high-speed airflow at the air ring at the edge of the grinding disc, and the large particles fall directly on the grinding disc. Re-grinding, when the material in the airflow passes through the dynamic and static separator, under the action of the rotating rotor, the coarse powder falls on the grinding disc for re-grinding, and the qualified fine powder is milled together with the airflow and collected in the powder collecting device, which is product. Moisture-containing materials are dried during contact with hot gas to achieve the required product moisture.
| Specifications | HVM800 | HVM1250 | HVM1300 | HVM1500 | HVM1700 | HVM1750 | HVM1900 | HVM2400 | HVM2400 | HVM2500 |
| Grinding table median diameter | 800 | 1250 | 1300 | 1500 | 1700 | 1750 | 1900 | 2400 | 2400 | 2500 |
| Capacity(t/h) | 1-3 | 2-7 | 3-12 | 4-16 | 6-24 | 7-27 | 7-28 | 9-35 | 10-39 | 11-45 |
| Materials Grain Size(mm) | 0-15 | 0-20 | 0-25 | 0-35 | 0-35 | 0-35 | 0-40 | 0-40 | 0-40 | 0-50 |
| Materials Moisture(%) | ＜5 | |||||||||
| Product Fineness(10-40um) | 97% | |||||||||
| Product Moisture(%) | ≤1 | |||||||||
| Main Motor Power(kw) | 55 | 132 | 180 | 250 | 355 | 400 | 450 | 560 | 630 | 710 |
Re:The data based on Mohs'hardness 3-4 material
The product fineness can reach 10 um(1250 mesh)
【Features】
1. High efficiency and precision classifier, unique air tightness, which can ensure the quality of end products.
2. The wear-resistant volute can effectively improve the material liquidity, decrease the air volume loss and avoid air energy loss.
3. The bevel gear overall dive can achieve higher transmission efficiency, easy to install and adjust, long service life and lower cost.
4. Inner thin oil lubrication system can realize lubrication between main bearing and drive bearing without any additional
lubrication pump, easy to maintenance.
5. The curved surface shovel with split design, only the blade to be replaced during maintenance, thus the shovel has long service life.
6. The isolated cyclone collector can effectively improve the classifying efficiency and accuracy.